SHELL GROUT IP (PC 2174) is cementitious micro-fine injection grout powder. It is based on unique PSD technology to facilitate effective filling of very fine cracks, pores and voids. It has extremely finer particle size compared to other 2 hydraulically setting materials like OPC. It has fineness by blaine of more than 9000 cm /gm. It is produced in state of the art manufacturing plant in a controlled environment resulting in consistent quality.
AREA OF APPLICATION :
Always add powder in to water. Add complete bag in the pre measured water. Small quantities up to 25 kg can be mixed with hand held assembly of drill machine and mixing paddle with 400 to 1200 rpm. Larger quantities shall be mixed with high speed colloidal shear vane mixers of 1400 rpm. If required, adjust the fluidity and setting time with the help of chemical admixtures. Typical mixing time is 5 to 10 minutes. Mix until a smooth, lump free fluid grout is obtained. Transfer the mixed material in agitator container. Mixed material shall be injected within 45 minutes after mixing.